The PS30 uses a fully discrete JFET input suitable for low output MC systems. The JFET's in the input stage are connected in parallel to reduce noise. Similar to tubes, JFET’s do not load the signal source; in particular, no direct currents (DC bias) can flow in or out of the phono input. This is particularly important to avoid magnetization of the pickup. The symmetrical structure of the input does the rest, the pickup only "sees" the selected terminating resistor and nothing else.
3x inputs; freely configurable for MM and MC cartridges.
Easy to read display and user-friendly menu for setting the various cartridge parameters. With the supplied remote control, you have everything in the palm of your hand.
13x different resistor values from 30 Ohm to 47kOhm and 8x different capacitor values from 50pF to 420pF to choose from
Phase Invert switchable
Consistent gain (50/60/70 dB) and sound quality on both XLR and RCA outputs because the RCA output is not derived from the “hot” pin of the XLR output. This is especially important for those who only use the Cinch (RCA) outputs.
Compact design; 260 x 170 x 310mm (W x H x D); various RAL colors available.
